Protection and accessories
NECESSARY PRODUCTS FOR EVERYONE
To enjoy the beauty of wood for a long time it is necessary to choose professional wood preservatives and branded accessories.

Wood protection and accessories.
Paints, varnishes, waxes and wood oils as well as assembly support systems.
It is a building material that is both demanding and easy to deal with. It does not require difficult processing, is versatile and can have many applications, from construction forms, floors, terrace and fence boards, to furniture and mouldings. When the wood is not too damp, it has very good insulating properties.
It is resistant to many chemical and external factors. If only we choose the material with an appropriate strength class, desired hardness and abrasion resistance, we will enjoy it for many years.
To fully enjoy this ecological, beautiful material as long as possible, we must remember,
in addition to fire protection, about regular use of fungicidals and mold-killers, moisture-proofing agents, and also ventilate the rooms where we use the wood in.
The application of appropriate products is necessary if we want to extract the full potential of this natural raw material.
When we take the time to properly secure the wood, we will enjoy it for many years.
Range of use
– For not statically overloaded wood that has no contact with ground or other surfaces.
– Building elements that do not maintain a fixed dimension or retain the dimension to a limited extent.
– Gable walls, facades and soffits, wood for garden architecture, sheds and much more
Properties
– The agent is used for protection of outdoors wood, that does not touch the ground. It protects against rot and blue stain in accordance with EN 335-1 or DIN 68800-1.
-The agent also protects the wood against moisture and sun. It does not crack nor does it peel off.
– The coating is resistant to damage caused by mold and algae
– It penetrates deep into the wood.
– Renovations do not require removing the previous layer or sanding the old coating with HK-Lasur.
Available capacity in liters 0,75 | 2,5 | 5 | 10 | 20
Range of use
– For wood used outdoors
– Wood without ground contact in accordance with EN 335-1,
use class 2 and 3
– For wooden building components that do not have a fixed dimension, like fences, half-timbered structures, car sheds, formwork
– For wooden building components that retain their dimension, such as wooden shutters, wooden profiles, garden gazebos.
– As a primer, interlayer and finishing coating
Properties
– It is enough to spread one layer
– 3in1: wood priming oil, primer and glaze
– protects wood against moisture and blue stain
– Coating resistant to damage caused by mold and algae
– Penetrates deep into the surface
– Retains intense colors
– Silky mat
– Renovations do not require removing the previous layer or sanding the old coating
– No dripping while used above head hight
– thin-layer glaze
– Does not peel off even when used for a long time
– Has a creamy consistency – it should not be stirred
– Individual colors of stain can be mixed with each other to obtain different shades of colors.
Available capacity in liters 0,75 | 2,5 | 5 | 10 | 20
Range of use
– for outdoor wood
– or non-resistant (softwood) species used outdoors
– as a primer for glaze and opaque coatings
Properties
– protection against blue stain and rot
– resistance to swelling; humidity adjustment
– contains solvents with a delicate scent
– it is a perfect adhesive layer for subsequent coatings
Available capacity in liters 0,75 | 2,5 | 5 | 20
Range of use
– for outdoor wood
– for wood that has no contact with ground according with PN EN 335-1, class 2 i 3
– Building elements that do not maintain a fixed dimension, e.g. fences, half-timbered construction, carports, formwork
– Building elements that maintain dimension to a limited extent, e.g. wooden shutters, wooden profiles, gazebos
– as a primer under opaque coatings
– not suitable for covering floors (terraces, wooden platforms, etc.)
container with a capacity of 5 liters or higher may only be sold to professional users.
Properties
– The agent is used for protection of outdoor wood that does not touch the ground. It protects against rot and blue stain in accordance with EN 335-1 lub DIN 68800-1.
– The agent also protects the wood against moisture and sun. It does not crack nor does it peel off.
– The agent coating is resistant to damage caused by mold and algae.
– It penetrates deep into the wood
– Renovations do not require removing the previous layer or sanding the old coating.
Available capacity in liters 0,75 | 2,5 | 5 | 20
Range of use
– Valuable objects made of wood: fences, facade formwork, shutters, wooden windows, exterior doors and garden furniture
-Colorless UV protection layer prone to abrasion used on colours to gain permanently light colours.
Properties
– silky shine
– resistant to weather conditions
– easy to clean
– high UV protection even for light colours
– excellent paint flow
Available capacity in liters 0,75 | 2,5 | 5 | 20
Range of use
– for wood and for other types of surfaces
– for indoors and outdoors, e.g. for wooden houses, facade formwork and soffits
– For zinc sheet (e.g. on rain gutters) and on mineral substrates
Properties
– strong covering
– high flexibility
– resistant to heavy rain
– mild smell
Available capacity in liters 0,75 | 2,5 | 5 | 10 | 20
Range of use
– for wood and for other types of surfaces
– for indoors and outdoors, e.g. for wooden houses, facade formwork and soffits
– For zinc sheet (e.g. on rain gutters) and on mineral substrates
Properties
– strong covering
– high flexibility
– resistant to heavy rain
– mild smell
Available capacity in liters 0,75 | 2,5 | 5 | 10 | 20
Range of use
– for all types of wood indoors
– for furniture
– for use on walls and ceilings
– for tous
– for wooden doors
– for damp rooms (kitchen, bathroom)
– for stairs and parquet, as a colored primer
Properties
– Water-based wood glaze
– product based on renewable raw materials (linseed oil and natural resin)
– good applications features
– high spreading rate
– very good water resistance (water beading effect)
– chemical resistance according to DIN 68861, part 1, 1C
– due to the content of natural raw materials, slight color fluctuations are possible. According to our practical experience this does not affect the final color result on the wood surface
Available capacity in liters 0,75 | 2,5 | 5 | 10
Range of use:
– for garden architecture – fences, pergolas, gazebos, bridges, etc.
– for garden furniture
– for wooden facade elements, etc.
Properties:
– protects wood up to 6 years
– modified alkyd resins
– does not pell of
– easy application
– high adhesion to a wood surface
– high durability of the coating
– regulates wood humidity
– resistant to the weather conditions
– emphasizes the natural beauty of wood
– provides high protection against biodegradation
Available capacity in liters 0,75 | 2,5 | 5 | 10 | 20
Range of use
– for wood used indoors and in open areas.
– For wooden building components that do not have a fixed dimension
– For wooden garden furniture and terraces
– For teak, bangkirai, massarandubes, iroko, oak, larch and Douglas fir
– For wood-polymer conglomerates, bamboo and for Resysta profiles we recommend our WPC-Imprägnier-Öl
Properties
– Works as a water repellent
– The coating is resistant to weather conditions and regulates wood humidity
– It protects the wood from drying.
– Colored variants protect the wood against graying.
– Intensive colours
– Easy color application
– Renovations do not require sanding the original coating.
Available capacity in liters 0,75 | 2,5 | 5
Range of use
– for wood used indoors and in open areas.
– For wooden building components that do not have a fixed dimension and maintain limited dimension
-For wooden garden furniture and terraces e.g. teak, bangkirai, larch, Douglas fir, accoya
– Not suitable for use on massaranduba and ipé wood for which we recommend Pflege-Öl.
– For exotic wood species not mentioned, please contact our Technical Service.
– For wood-polymer conglomerates, bamboo and for Resysta profiles we recommend our WPC-Imprägnier-Öl
Properties
– based on renewable raw materials, at least 80%
– Water-based product with very low solvent content
– Creates a non-slip coating.
– The product is resistant to weather conditions and UV radiation.
– Renovations do not require sanding the original coating.
– excellent paint flow
– It protects the wood from drying.
– Recyclable metal packaging.
Available capacity in liters 0,75 | 2,5 | 5
Range of use:
– for terrace boadrs
– garden architecture – houses, fences, pergolas, gazebos, bridges, etc.
– garden furniture
– wooden facade elements, etc.
Properties:
– long-term protection
– penetrates deep into wood
– easy application
– environmentally friendly
– resistant to weather conditions
– emphasizes the natural beauty of wood
Available capacity in liters 0,75 | 2,5 | 5 | 20
Range of use
– For cleaning and brightening wooden terraces covered with partly weathered decorative coatings.
Properties
– Effectively removes dirt, gray discoloration, rust, algae and mosses from terrace boards and other wooden substrates.
– Thanks to that, there is no need to sand these surfaces.
–Consumption: approximately 200 ml/m² for a single use.
Available capacity in liters | 2,5 |
Range of use
– For cleaning and brightening wooden terraces covered with partly weathered decorative coatings.
Properties
– Effectively removes dirt, gray discoloration, rust, algae and mosses from terrace boards and other wooden substrates.
– Thanks to that, there is no need to sand these surfaces.
–Consumption: approximately 200 ml/m² for a single use.
Available capacity in liters | 2,5 |
Range of use
– For wooden floors and stairs
– For high-quality solid wood furniture
– For panels and strips
– For cork floors
– For kitchen worktops use HWS-112 (1826) or HSO-117 (2590).
Properties
– Limits the accumulation of dust and dirt, facilitating surface cleaning
– Deeply penetrates and emphasizes the natural structure of wood
– long work life, resistance to pollution and wear
– Chemical resistant according to DIN 68861, part 1, 1C
– Forms a thin protective layer of high-quality waxes
Available capacity in liters 0,75 | 2,5 | 20
Range of use
– For wood in living spaces
– For furniture and interior design elements
– For wooden floors and stairs
– For table and work tops
– It is not necessary to remove the excess of the product
– Not suitable for use on bleached wood
– For professional users
Properties
– Quick drying material
– Resistant to abrasion and scratches
– Very good chemical resistance
– Creates a non-slip coating
– Very low gloss tendency
– Natural look and tactile features
Available capacity in liters 1 | 5 | 20
Range of use
– High quality furniture
– For finishing surfaces that meet the highest mechanical strength requirements
– As a coating on colored varnishes used to improve the resistance in contact with warm, moist objects, such as glasses and to provide the appropriate gloss level to the coating
Properties
– Quick drying and good sandability
– Good adhesion to vertical surfaces
– High filling power due to high binder content
– Good spreading on the surface emphasizing the grain and pore structure
– Very good chemical resistance: DIN 68861 part 1, 1 B.
– Very good abrasion and scratch resistance
– Lightfastness
Available capacity in liters 5 | 20
Range of use:
– for old and new floors made of wood
– for indoor wooden furniture
– for European and exotic wood species
Properties:
– permanently protects
– easy application
– easy surface care
– velvet surface with hydrophobic properties
– environmentally friendly
– underlining the natural beauty of the wood
Available capacity in liters 1 | 2,5
THE HR PROOF IMPREGNATE IS INTENDED FOR FIRE PROTECTION OF WOOD AND WOOD-BASED PRODUCTS.
Impregnation with HOLZProf is intended to reduce the role of wood and wood-based materials in fires of: production areas, farm facilities, public facilities and, most of all, residential facilities.
HR PROF impregnation makes wooden elements change into non-flammable materials and reduces their involvement in fires. When on fire, the elements do not emit smoke or produce flaming droplets : classification B-s1,d0 = NRO
The effectiveness of HOLZProf is confirmed by many tests in the following certification bodies.
UE: Holland SKH (KOMO certificate), Holland Effectis, Sweden SP TRI, UK BM TRADA, Finland VTT Expert, Estonia TUV NORD, Belgium WFRGENT NV, Lotvia MEKA, UK BRE Global , Poland ITB, Poland CNBOP-PIB.
Research was carried out on various species of wood in the density range from 340 kg / m3 to 950 kg / m3. Classification reports from these tests and test results confirm that wood of different densities subjected to fireproof impregnation with HOLZProf achieved the reaction to fire class of : B-s, d0.
Range of use:
the product can be used either indoors or outdoors
It does not require additional protective coatings such as stain or varnish.
HOLZProf can also be used inside buildings without additional covers because it is not classified as harmful to human health and the environment. It does not emit harmful substances, is safe and does not contain any biocides.
- The product is very easy to apply, non-flammable and not explosive.
- It is not a covering agent like paints, stain or varnishes – it can be used on floors and terraces where surface abrasion occurs.
- It is not a salt-based agent washed out of wood in external conditions.
- It does not require any external protective coatings.
- The product can be used both on softwood and hardwood.
- It also protects modified wood materials like lignocellulosic composite, Accoya, LVL, plywood and Thermo-treated wood products (see details).
- Modifies and strengthens the external structure of wood, without changing the color.
- After drying, the agent is wash-resistant and permanently binds with cellulose.
- Penetrates 2 – 5 mm deep into the wood, does not close its pores.
- It blocks enzymes and hampers the activity of microorganisms existing on wood.
- Odorless, colorless, it has no toxic or carcinogenic properties.
Available capacity in liters 5 | 20

A jig for screwing screws into a terrace board at an angle of 50 degrees.
Necessary drilling jig accessories:
Screws 4.2x60x250 pcs
Special drill bit
Special long bit

SPAX-D Silver Boardwalk screw
5x60x100 pcs
5x50x200 pcs

SPAX-D old gold Boardwalk screw
5x60x100 pcs
5x50x200 pcs

Silver Spax Screw
4, x60x100 pcs
4.5x50x200 pcs

Old gold Spax screws
4,x60x100 pcs
4,5x50x200 pcs

Spax joist tape
extends the service life of 20mx80mm

Spax drill 2 step
With 2 drilling steps of 4.1 mm and 6.5 mm diameter

Spax pads under joists
Protects the wood sub-structure from rising damp
100x100x8mm

Eurotec tape rubber – mounting under joists
2015x70x8mm

Eurotec Eurotec Cork tape – mounting under joists
4000x70x6mm

T-stick
terrace assembly without any visual interruption
A2 material

Deck glider
terrace assembly without any visual interruption
(screws in set)

Kaiman pro Deckboard wrench
for easy positioning deck boards

Dista strip
Screw protection against tearing
13x16x730mm

Tenax spacer
Space 6mm Optimum back ventilation, optimum clearance

Eurotec Root control fleece underlay
Permeable polypropylene underlay
Very limited permeability to water
inhibits plant growth under the fleece
1,6x10m

Eurotec adjustable pedestals
Load-bearing capacity of 2,2 kN/pedestal

Spax facade screw.
Reduces delamination and bulging of wood. It penetrates wood thanks to its milling ribs.
4,5x35x200 psc
4,5x40x200 psc
4,5x50x200 psc
4,5x60x100 psc
4,5x70x100 psc
4,5x100x100 psc

Eurotec Floorfix – recommended for facade installation
intended only for softwood, corrosion-resistant to a limited extent,
not acid-resistant, not suitable for the atmosphere with chlorine content.
4,2x42x250 pcs
4,2x55x250 pcs
4,8x80x250 pcs
This post is also available in: Polish